Server Technology PT40 Manual de Instalação descarregar pdf (Página 56)

56 • Advanced Operations Smart Cabinet Distribution Unit

Installation and Operations Manual

Status trap

A Status trap is generated when an error condition occurs on a tower, infeed, Environmental Monitor or

individual sensor. Status traps include the reported Status, the Location of the Sentry and identifier and

name of the affected tower, infeed, outlet, environmental monitor or sensor.

Any error state generates a Status trap and triggers the trap timer. A new trap is generated at the end of

every timer period until the Status returns to a non-error status. All status traps are enabled by default.

Tower Status traps

Status Error Description

Normal Tower is working correctly

NoComm x Communication to the tower has been lost

Infeed Status traps

Status Error Description

On Infeed is on

OffError x Infeed should be on but no current is sensed at the infeed

NoComm x Communication to the infeed has been lost

Environmental Monitor Status traps

Status Error Description

Normal Environmental Monitor is working correctly

NoComm x Communication to the Environmental Monitor has been lost

Temperature/Humidity Sensor Status traps

Status Error Description

Found The sensor has been detected

NotFound No sensor has been detected

Lost x Sensor initially detected but communication to the sensor has been lost

NoComm x Communication to the sensor has been lost

NOTE: Traps are generated according to a hierarchical architecture; i.e., if a Tower Status enters a trap condition, only the

Tower Status trap will be generated. Infeed, Outlet, Environmental Monitor or Sensor Status and Temp and Humid traps

will be suppressed until the Tower Status returns to Normal.

Load Trap

The Load trap is generated whenever the total input load on an infeed exceeds a preset threshold. Load

traps include the reported input load, load status, Location of the Sentry, and identifier and name of the

affected infeed.

Any error state generates a Load trap and triggers the trap timer. A new trap is generated at the end of

every timer period until the Load returns to a non-error status.

Load traps

Status Error Description

Normal Infeed is on and within preset thresholds

NotOn Infeed is off

Reading Non-error state – Load status currently being read

LoadHigh x Infeed current load exceeds preset threshold

OverLoad x Infeed current load exceeds the measurable range for the infeed

ReadError x Unable to read Load status

NoComm x Communication to the infeed has been lost

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 89 90

Comentários a estes Manuais

Sem comentários

Server Technology PT40 Manual de Instalação Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Server Technology PT40